V-640A of CNC VERTICAL MILLING MACHINING CENTER V Series
Mechanical characteristics
- The base use an A-shaped rib structure layout to improve the shock absorption effect, and the overall iron parts use a box design to achieve high bending rigidity.
- The structure use advanced cast iron material, which is tempered to eliminate internal stress and ensure the best mesh rigidity, accuracy, and durability.
- The high rigidity structure originates from the accumulation of years of experience data and the rationalization of the slenderness ratio design of the mechanism, improving the compression and lateral bending resistance of iron parts.
- The design of a high-speed tool changing mechanism, combined with pre induction control and an efficient tool changing system, enables knife changing work.
Parameter table:
| Model | V-640A |
| X axis travel | 600 mm |
| Y axis travel | 450 mm |
| Z axis travel | 460 mm |
| Worktable size | 700 mm × 400mm |
| Distance from spindle end face to work table | 70-530 mm |
| Distance from spindle center to column guide rail | 450 mm |
| Maximum load of worktable | 250 kg |
| T groove dimension | 3-14mm/100mm |
| Spindle taper hole | BT-30 |
| Maximum spindle speed | 20000 rpm (Directly connected type) |
| Spindle motor specification | 5.5 kw |
| Three axis motor specifications | 1.5×1.5×3 kw |
| Three axis maximum movement speed | 45/48/48 m/min |
| Automatic tool change type | Knife Arm type |
| Number of tools | 21 |
| Maximum tool length | 200 mm |
| Maximum weight of tool | 3 kg |
| Cutting speed | 1 – 12000 mm/min |
| Positioning accuracy | ±0.004 mm |
| X-axis ball screw | Φ 25/16 mm |
| Y-axis ball screw | Φ 25/16 mm |
| Z-axis ball screw | Φ 25/16 mm |
| X-line track | 25 mm |
| Y-line track | 25 mm |
| Z-axis guide rail specification | 30 mm |
| Air pressure | ≥6 kg/cm² |
| Power | 15 kVA |
| Mechanicalweight | 3600 kg |
| Overall dimension (LxWxH) | 2000mm x 2150mm x 2650mm |
Configuration table:
| Standard Configuration | |
| Toolbox and adjustment tools | Spindle oil cooler |
| LED work lights | Program instructions |
| LED warning light | Tool magazine |
| Tool cooling system | CF card |
| Operation manual | Maintenance manual |
| Rear flushing device | Certificate of Conformity |
| Automatic lubrication system | Laser check list |
| Electrical box air conditioner | Transmission line |
| Electronic handwheel | |
| Selective Configuration | |
| BT40/50 blade and nozzle | Disassembly tool holder |
| Flat pliers pressing plate | Voltage regulator |
| Fourth axis (CNC indexing plate) | Fifth axis (fourth axis plus tilt axis) |
| Spindle center water outlet system | |
| Optional control system | |
| FANUC | SIEMENS |
| MITSUBISHI M80 | |
